Security screws are located in a separate bag of your iseeBell Video Doorbell packaging and require a star-head screwdriver (provided) to use.
Align your iseeBell Video Doorbell with the mounting brackets, then press in and down firmly. Get iseeBell to click into place on the mounting bracket.
Once the unit clicks into place, use the specialty screwdriver to screw in the security screws. Stop turning the screw once you feel resistance or the top of the screw is flush with the bottom of the unit.
The security screws lock iseeBell to the mounting bracket, preventing anyone from pushing up and removing the unit.
To remove iseeBell from the mounting bracket, loosen the security screws about 1/8″, then lift up on the unit. Your unit will click up and can then be removed from the mounting bracket.
If you misplace a security screw or screwdriver, contact our support for help: